How to Install a Ghost Immobiliser
A ghost immobiliser is an effective deterrent against car thieves. Combining this device with other security devices and being vigilant can help you create a strong defense against the modern, tech adept thieves.
Ghost immobilisers can safeguard your vehicle from key cloning, hotwiring and relay car theft by requiring a pin code to start the engine. It works by using buttons that are already present on your center console or steering wheel, which means it is undetectable to thieves.
Identifying the Wires
With more and more vehicles being taken away without the owner's key, it's important to protect your vehicle. While thieves might be able to copy your key fob, or even steal the car by hacking its system Ghost immobilisers provide an additional layer of security by blocking all signals coming from the key fob and making it impossible to start your car without entering a PIN.
You can install the ghost immobiliser your own, but it is better to let a professional do the work. A professional technician will know the best place to install the device and how to connect it to the wiring of your vehicle. Installation can be difficult, and it's important that all connections are made correctly to avoid malfunctions or damage.
To get the most effective results, it is recommended to work in a well-lit location and wear appropriate safety gear. Also, you should read the user guide to get familiar with the wiring system. This will assist you in identifying the wires required for installation and ensure that you have the correct tools and equipment to complete the job properly.
Once the wiring is connected, you can connect your battery and test to verify that the system is functioning properly. To prevent electrical problems, you should also ensure that the battery terminals are secured. Also, mark the CAN H and CAN L wires using labels or tape to keep the track of them during the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode when you need someone else to drive it temporarily such as for valet parking or when the vehicle needs to be serviced. You can enter the code by pressing a service button on the steering column, the centre console or door panels. The Ghost Immobiliser will enter PIN mode that allows for changing of the code.
Some thieves try to circumvent an immobiliser that is ghostly by using spoofing or jamming devices to stop or send fake signals to the system. This can be overcome by investing in the latest anti-jamming technologies and monitoring your Ghost Immobiliser for signs of altering the system.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security device designed to prevent car theft. It uses innovative technology to detect the engine and then deactivate it when the correct PIN is entered. This prevents the vehicle from being taken by thieves. The system is extremely effective and discreet, without visible indicators to deter criminals. You may need to remove your device for maintenance, upgrades, or when you decide to sell your vehicle.
This procedure requires special tools and knowledge because you'll be working with wires, and bypassing certain factory parts. Additionally, it is crucial to follow the step-by-step directions provided by the manufacturer of the ghost immobiliser. It is recommended to consult an expert mechanic or auto electrician, especially if you are not familiar with working on automobiles.
After identifying the wires and disconnecting them, it is important to verify the condition of your battery. Check that it's clean and free of any corrosion, and that the connections are secure. If necessary, consider replacing the battery to ensure that it is able to withstand the demands of a security system that is aftermarket.
After you have disconnected the wiring you can then remove the ghost immobiliser. Wire cutters or strippers can be used to cut off the wires. Be careful not to cause damage to them or their terminals. Label each wire so that it is easier to reconnect them in the future. If the wires have been joined, use a heat resistant tool to break the connection. It is also crucial to insulate the cut wires by using insulation tape or heat shrink tubing to prevent them from short circuits.
Connect the wires using the 12V constant power source. Use a fuse tap if necessary to safeguard the connections by using a fuse. Finally, connect the grounding wire to a grounded point on the vehicle's chassis.
Once you have reconnected the wires, restart your vehicle and enter the PIN code. Then, restart the engine. If autowatch ghost immobiliser cost fails to start, the ghost immobiliser has been successfully removed.
Making Connections
Ghost immobilisers are an affordable way to improve the security and safety of your vehicle. It connects to your vehicle's CAN bus system, intercepting signals and preventing the engine from starting until the correct PIN code is entered. This device is virtually impossible to disable. It's a great choice for drivers who want extra peace of mind and security. It can lower your insurance rates when combined with a Thatcham Approved Tracking System.
It is essential to obtain and review the wiring diagram for the vehicle model before you begin the installation. The diagram will act as a reference guide for locating the wires required to make precise connections. The connection will be long-lasting and secure if you choose the correct wiring connectors or the proper soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system need to be properly identified and connected. Use small labels or tape to label the CAN L and CAN H wires. This will prevent confusion during installation. These wires are located in different locations on every vehicle. It is important to look up the wiring diagram or online resources to determine them.
After the correct cables have been connected, power can be restored to the Ghost immobiliser. It is a good idea to test the immobiliser. Start the engine, but do not enter the code. This will ensure that the immobiliser was installed correctly and functioning exactly as it was intended to. It is essential to test your immobiliser on a regular basis. This will allow you to identify any problems or issues early.
The ghost immobiliser can also be installed quickly and without modifying the wiring in your vehicle. It's also a great choice for those who wish to increase the security of their vehicles, as it can be utilized in conjunction with a Thatcham-approved alarm or tracker that will notify your smartphone or tablet whenever the vehicle is damaged.
Mounting the Unit
The Ghost immobiliser is a great an deterrent to thieves of cars especially when paired with the use of a GPS tracking device. It uses buttons on the center console, doors and steering wheel to create a unique sequence that you can only recognise. This stops your car from beginning. The unit is also weatherproof and tamper-proof. It also comes with a three-year warranty and is recommended by a variety of insurance companies.
It is essential to follow the instructions when installing the device. While some people are able to handle the work themselves, it's best to seek out a professional you are unsure. Multimeters and wire strippers are essential tools to identify the wiring and make precise connections. It's also recommended to buy some insulation and electrical tape to help in protecting the connections from potential damage. It's a great idea test your device after the installation is completed to make sure that everything works as it should.
A Ghost immobiliser is a great way to protect your vehicle from theft, particularly in areas of high crime. It can be paired up with an iPhone application to make it easy to manage and monitoring. It stops key cloning or ECU swapping, among other security threats. It's a popular choice for vehicle owners looking to protect their investment, and it's simple to install.
The Ghost II immobiliser is designed in a sleek, low-profile design that makes it virtually invisible to thieves. It is connected to the CAN (Controller Area Network) system in your vehicle. It prevents the engine from starting unless a PIN code is entered. The PIN code is generated using a unique sequence of buttons on the steering wheel and centre console, as well as the doors. It is able to be changed at anytime. The device is also tamperproof and includes a GPS tracker that can assist police locate your vehicle in the event of a theft. It's a great choice for protecting your vehicle from thiefs and it's fully Thatcham-approved.